There are several situations in which your Samsung dryer won’t turn on. Therefore, first of all, you need to determine what kind of problem is occurring. Samsung dryer no power to the control panel, does the dryer not turn on at all; does not start the drum; or does not perform the drying process itself? In all of the above cases, there can be different breakdowns and malfunctions. It is easiest to deal with a new appliance that has not yet had time to wear out.
The following reasons for the dryer not turning on are listed from most likely to least likely. Check or test Samsung dryer troubleshooting, starting with the most likely causes.
Contents
Common faults if Samsung dryer no power
Before you start troubleshooting your dryer, it’s a good idea to make sure it’s properly plugged into a working power source. Maybe there was a power outage in the entire house or the circuit breaker (RCD) in the apartment panel has tripped and won’t power to the dryer. The socket, plug, and cord must be intact; no broken insulation, signs of melting, or other damage are allowed. Modern appliances will not work if the voltage in the network is far from the rated voltage (that is, significantly higher or lower than the standard 220 V). If properly plugged in, you need to look for a problem inside the drying machine.
When the machine does not turn on (indicators do not light up), the reason is often a faulty “Start” button. This usually happens when there is a lot of pressure on the button.
All modern appliances are equipped with a surge protector (FPS). It is designed to protect the electronic components of the dryer from impulse and high-frequency interference (voltage spikes and interference from other electrical appliances). The FPS is installed at the entrance to the electrical circuit breaker, just behind the power cord. A breakage of the noise filter prevents the dryer from working because, in this case, the power will not be supplied to the control unit and other elements.
Electronic module malfunctions and a broken circuit breaker round out the list of common malfunctions. These include burned-out tracks on the control board, oxidized contacts, and broken wiring. Let’s look at more detailed Samsung dryer troubleshooting.
Samsung dryer thermal fuse
The fuse is a safety device designed to protect the Samsung dryer from overheating. The fuse is located on the blower housing or the dryer’s heating source, such as the heating element (coil) on electric dryers or the gas burner on gas models. The Samsung dryer thermal fuse must have continuity, which means that current can flow through it. If the fuse overheats, it will blow, and continuity will be lost. You can use a multimeter to check for continuity. Keep in mind that a blown fuse is an indicator of restricted venting from the dryer to the outside. Always check the venting when replacing a blown thermal fuse.
Start Switch
To determine if the start switch is defective, try turning the Samsung dryer on. If the dryer hums but does not start, the start switch has nothing to do with it. If the dryer doesn’t respond or make a noise, the start switch may be defective. Use a multimeter to check the start switch for continuity, and if it is broken, replace it.
Samsung dryer door switch
The switch is activated when the dryer door is closed. On most dryers, the switch makes an audible click when activated. To determine if the door latch is working, try running the dryer and then listen for the “click”. If the switch makes a clicking sound, it is probably fine. If you don’t hear a click, however, use a multimeter to check it for continuity, and if it is broken, replace it.
Drive motor
The drive motor spins the drum and impeller to release air. Before replacing the motor, first, check the thermal fuse, start switch, and door switch. If all these parts are working properly but the motor is making noise, then remove the belt from the motor and check the impeller for obstructions. If there are no obstructions, the dryer motor may be defective. If you suspect the motor is defective, replace the motor.
Belt Switch in Samsung dryer
Samsung dryer no power? On most dryers, if the dryer belt is damaged, the motor will still run, but the drum will not spin. However, some dryers have a switch that cuts power to the dryer if the drive belt is damaged. If this switch is not working, it can cut power to the Samsung dryer even if the belt is not damaged.
Turn the dryer on first, and then listen for a humming noise. If the dryer makes a noise when you try to start it, it means the belt switch is fine. Next, look up your model number to determine if your dryer has a belt switch, and if yes, use a multimeter to check for continuity. If the continuity of the switch is broken, then replace it. If the Samsung dryer no power, you can find out more information.
Incoming Voltage Problem
If you have a gas dryer, unplug the dryer from the outlet and try plugging in another appliance to determine if the working outlet is working. If you have an electric dryer, check the fuses at the electrical panel in your home. If the plugs or fuses work, then use a multimeter to check the outlet.
Control panel in Samsung dryer
The control panel may be defective. However, this is rarely the case. Before replacing the panel, check all the more frequently broken parts. If you determine that all other components are working properly, replace the control panel. (The control panel is hard to test, but you can try to check it for signs of burnout or short circuits).
You can also check if the child lock mode is enabled in the dryer settings. Child lock may also be the reason why Samsung dryer is not starting.
Timer
The timer may be defective. However, this is very rare. Before replacing the timer, check all the more commonly broken parts. If, however, you decide that all other components are working correctly, check the timer with a multimeter and familiarize yourself with the wiring diagram. If the timer is defective, replace it.
Conclusion
If our article did not help you, and you were not able to solve the problem “Samsung dryer no power” yourself. How to solve the problem if the Samsung dryer not starting? The appliance repair technician will perform a circuit test and determine the exact cause of the malfunctioning Samsung dryer settings. If the problem lies in the burnout of any part or a violation of the integrity of the wiring, it is usually not difficult to restore the functionality of the technique.
But if the control unit or electric motor is not repairable and needs replacement, the user should seriously consider buying a new Samsung dryer. Such spare parts usually have to be searched for a long time or ordered directly from the manufacturer, and the cost of the procedure will unpleasantly surprise you. You can also learn about the pros and cons of used washing machines and dryers.